Ultimaker 2+ 3D Printer Maintenance Kit - Nozzle Cleaner, Lubricant & Tools for Smooth Printing | Perfect for Home & Office 3D Printing Projects

Product Description

 Ultimaker 2+ Maintenance Kit

The Ultimaker 2+ Maintenance Kit contains the most commonly used replacement parts for the Ultimaker 2+ or Ultimaker 2 Extended+. It can be purchased in addition to your Ultimaker and used as an overall maintenance kit, or it can be used for spare parts.

This Maintenance Kit includes the following components:

• 1x Glass plate
• 1x Bowden tube
• 1x PT100 B sensor
• 1x Heater cartridge
• 1x Magnalube
• 1x Machine oil
• 1x Calibration card
• 2x Build plate clamp
• 2x Clamp clip
• 2x Tube coupling collet
• 1x Hot end isolator
• 4x Olsson nozzles (0.40, 0.25, 0.60 and 0.80 mm)
• 2x TFM isolator coupler
• 1x Print head alignment aid
• 1x Hot-end cooling fan
• 2x Print cooling fan

To keep your Ultimaker 2+ in optimal condition, Ultimaker recommends the following maintenance schedule, based on 1,500 printing hours per year:

• Every Month - Clean printer and lubricate axles.
• Every 3 Months - Check for play on axles, check tension of short belts, lubricate lead screw Z motor, and re-tighten hot end isolator.
• Every Year - Clean feeder and replace bowden tube.