Product Description

MakerBot PLA Filament - 1.75mm

Color Selections (see above):

• Cool Grey
• True Black
• True Blue
• True Red
• True White

Features:

• Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of printing.

• If you're new to 3D printing, MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.

• MakerBot PLA Filament adheres well to acrylic and to blue painter's tape. Prints with a large bottom layer may have a tendency to curl. To prevent curling, use rafts.

• Store MakerBot PLA Filament in a cool, dry place as it can absorb moisture from the air and long-term exposure to humidity can compromise filament quality and performances.

• Be sure your build plate is level, clean and oil-free before printing.

Please Note: This item is non-returnable.